Wiko Wax Safe Mode

How to enter safe mode on Wiko Wax? In this tutorial, you can learn step by step how to enter safe mode on Wiko Wax.

You can delete all data on your SD card by navigating to Settings > Battery and device care > Storage > SD card > Format > Format SD card.

If your Wiko Wax has any of these problems:

Freezing,
Overheating,
Stop responding,
Unexpected stucks,
Apps keep crashing,
Takes a long time to respond,
Randomly reboots or restarts,
Shuts down without restarting,

Start your Wiko Wax in safe mode to figure out what apps is corrupted and help your phone running better.

In Safe mode, your device won't run any third-party apps. This allows you to easily identify and remove the app that may be causing the problem.

Within Safe Mode you'll be able to test for lots of different issues, navigate around the device to see if you run into any problems. You can use Safe Mode to keep an eye on your battery life or mobile data usage for as long as you'd like; however there will be apps that won't be available inside Safe Mode.

There are 3 different methods to exit safe mode on your Wiko Wax and all ways are require the device to restart completely.

Hold the Power button on the right hand side and select Restart on the screen.
Hold Volume Down and Power for at least 5 seconds to force the device to restart.
Swipe down from the top of the screen to access the Notification Panel. Select the notification Safe Mode is on and tap Turn Off on the prompt to restart the device.

How to restart in safe mode your Wiko Wax?

If you are having problems with system and apps your Wiko Wax you can identify and remove the app that may be causing the problem with safe mode.

Restart in safe mode your phone by following the steps below:

Turn the device off by holding the Power button until the option to Power Off appears on the screen.
Tap Power Off.
Press and hold the Power and the Volume Down buttons at the same time, to turn the device on.
When you see the tecno logo appear on the screen, you can let go of the Power button while the device boots up. Make sure to keep holding the Volume Down button.
You will now be able to see Safe Mode down the near the bottom left of the screen.

You can also enter Safe Mode on Wiko Wax by opening the Power Menu, touching and holding the Power Off icon, and then tapping the Safe Mode icon.

If your phone's still has problem with system or apps you can consider a factory reset or a hard reset process for formatting your phone to factory default settings.

Leave us a comment to get more help.

How to restart in safe mode your Wiko Wax?

This article is helpful?