Tecno Spark 6 Bootloader Mode
How to enter bootloader mode on Tecno Spark 6? In this tutorial, you can learn step by step how to enter bootloader mode on Tecno Spark 6.
A factory data reset will remove all data from your phone. While any data stored in your Google Account will be restored, all apps and their associated data will be uninstalled. Before you perform a factory data reset, we recommend backing up your phone.
If your Tecno Spark 6 has any of these problems:
- Freezing,
- Overheating,
- Boot looping,
- Stop responding,
- Poor performance,
- Unexpected stucks,
- Apps keep crashing,
- Device is not opening,
- Suspicious device activity,
- Virus or malware infections,
- Randomly reboots or restarts,
- Shuts down without restarting,
Start your Tecno Spark 6 in bootloader mode unlock your bootloader and help your phone running better.
Bootloader Mode is separate from the operating system and offers many useful options such as install Stock ROM, install Custom ROM, TWRP etc.
Tecno Spark 6
Tecno Spark 6
Tecno Spark 6
Tecno Spark 6
Tecno Spark 6
Tecno Spark 6
Within Safe Mode you'll be able to test for lots of different issues, navigate around the device to see if you run into any problems. You can use Safe Mode to keep an eye on your battery life or mobile data usage for as long as you'd like; however there will be apps that won't be available inside Safe Mode.
You can perform the following operations on your Tecno Spark 6 using recovery mode:
- Reboot to bootloader
- Enter Fastboot
- Apply update from ADB
- Apply update from SD card
- Wipe data / factory reset
- Wipe cache partition
- Mount / system
- Run graphics test
- Run locale test
- Reboot system now
- Power off
- Repair apps
Tecno Spark 6
How to boot into bootloader mode on Tecno Spark 6?
If you are having problems with system and apps your Tecno Spark 6 you can use many advanced options or install a Stock ROM with bootloader mode.
Boot into fastboot mode your phone by following the steps below:
- Plug a USB-C / Micro USB cable into your phone and connect it to your computer.
- Turn off your phone with the USB cable connected to computer.
- Press and hold the Power and the Volume Up buttons at the same time, to turn the device on.
- You will now be able to see Recovery Mode on the screen.
- Use the Volume Up and Volume Down buttons to highlight Reboot to Bootloader and then press the Power button.
- Your phone will boot into the Bootloader Mode.
To exit the bootloader mode on your Tecno Spark 6 using the Volume Up and Volume Down buttons to highlight Reboot System Now and then press the Power button.
Leave us a comment to get more help.
Tecno Spark 6